D-Link DCS-4705E User Manual - Page 27
PPPoE, Enable IPv6, Manually, Setup The IP, Address, Enable PPPoE, User Name, Password, PPPoE Status
View all D-Link DCS-4705E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Section 3: Configuration IPv6 Use this section to configure your camera's IPv6 settings. After making any changes, click the Save button to save your changes. Enable IPv6: Enable the IPv6 setting to use the IPv6 protocol. Manually Enabling the option allows you to manually set up the address, specify an Setup The IP optional IP address, specify an optional router address, and an optional Address: primary DNS address. You can click the Information button to see the IPv6 address lists for the host, gateway, and DNS server. PPPoE Use this section to configure your camera's PPPoE settings. After making any changes, click the Save button to save your changes. Enable PPPoE: Enable this setting if your network uses PPPoE. User Name / Enter the username and password for your PPPoE account. Re-enter your Password: password in the Confirm Password field. You may obtain this information from your ISP. PPPoE Status: This shows your current PPPoE connection status. D-Link DCS-4705E User Manual 27