D-Link DCS-4705E User Manual - Page 9
Installation, Mounting the Camera - test
 |
View all D-Link DCS-4705E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Section 2: Installation Installation Mounting the Camera It is highly recommended that you configure and test your camera before mounting it. Refer to "Software Installation" on page 14 for more information. Step 1 Place the mounting sticker where you want to position the camera. Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then insert the wall anchors into the holes. Step 2 If you are running the camera cables through the wall, drill a hole in the center and pull the cables through the hole. Step 3 Use the screws provided to mount the camera to the wall. If you are running the camera cables out the side of the camera, guide the camera cables through the cable channel on the base. D-Link DCS-4705E User Manual 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
9
D-Link DCS-4705E User Manual
Section 2: Installation
Installation
Mounting the Camera
It is highly recommended that you configure and test your camera before mounting it. Refer to
"Software Installation" on page 14
for more
information.
Step 1
Place the mounting sticker where you want to position the camera.
Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then insert the
wall anchors into the holes.
Step 2
If you are running the camera cables through the wall
, drill a hole in the center and pull
the cables through the hole.
Step 3
Use the screws provided to mount the camera to the wall.
If you are running the camera cables out the side of the camera
, guide the camera cables
through the cable channel on the base.