D-Link DCS-5300G Product Manual - Page 44
Configuration > Advanced > Mail & FTP Continued, 2nd FTP user name, 2nd FTP password - support
UPC - 790069269530
View all D-Link DCS-5300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Using the DCS-5300G with an Internet browser (continued) Configuration > Advanced > Mail & FTP (Continued) Primary FTP Passive Mode- If the DCS-5300G is located inside a network that is protected by a firewall, a data connection for FTP may be prohibited. Passive mode FTP can bypass this rule and allow the uploading of snapshots. If the passive mode is selected, the DCS-5300G can automatically attempt to upload in active mode if the external FTP server does not support passive mode. 2nd FTP server - 2nd FTP user name 2nd FTP password 2nd FTP remote folder Secondary FTP passive Mode - The domain name or IP address of the external FTP server. Note that the 2nd FTP server will only be used if the 1st FTP server is unavailable. If image upload to the 1st FTP server is successful, no attempts will be made to connect to the 2nd FTP server. Granted user name on the backup FTP server. Granted password on the backup FTP server. Granted folder on the backup FTP server. Passive mode setting for the backup FTP server. Click Apply to make changes effective Invalid settings may cause the DCS-5300G to not respond. Change the configuration settings only if necessary. Consult with your network administrator or your Internet Service Provider (ISP) if you do not have the necessary information. If you cannot connect to the camera, refer to page 131 for camera reset and restore factory settings procedures. 44