D-Link DCS-5300G Product Manual - Page 65
Record Snapshots to your FTP server with, Motion Detection continued - user manual
UPC - 790069269530
View all D-Link DCS-5300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Record Snapshots to your FTP server with Motion Detection (continued) Next, click the Mail & FTP button under the Advanced tab to set the FTP server settings for the DCS-5300G. Click Mail & FTP 1 2 3 4 5 6 In this window, enter the settings for the FTP server you wish to record to. Optionally, you can enter settings for a secondary backup FTP server. 1 Local FTP server port- The Default port is 21. To connect to an FTP sever, it is recommended that you do not change the port number unless your camera is behind a router. If your camera is behind a router, you can assign any port number to this field, but you must enable port forwarding on the router. Please refer to your router manual for more information on port forwarding. 2 1st FTP server- If you are going to upload snapshots to an FTP server, you will need to fill in the Domain name or IP address of your external FTP server such as ftp://dlink.com or ftp://123.123.123.1. (The server name and IP address will vary depending on the user.) The following user settings must be correctly configured for remote access. 65