D-Link DES-3010PA-TAA CLI Guide - Page 268
Syslog Commands, logging
UPC - 790069296567
View all D-Link DES-3010PA-TAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
D-Link DES-3010FA/GA/PA CLI Reference Guide Section 23. Syslog Commands logging on The logging on Global Configuration mode command controls error message logging. This command sends debug or error messages to a logging process, which logs messages to designated locations asynchronously to the process that generated the messages. To disable the logging process, use the no form of this command. Syntax logging on no logging on Default Configuration Logging is enabled. Command Mode Global Configuration mode User Guidelines The logging process controls the distribution of logging messages at various destinations, such as the logging buffer, logging file or syslog server. Logging on and off at these destinations can be individually configured using the logging buffered, logging file, and logging Global Configuration mode commands. However, if the logging on command is disabled, no messages are sent to these destinations. Only the console receives messages. Example The following example enables logging error messages. Console(config)# logging on Page 267