D-Link DES-3026 Reference Manual - Page 55
disable smtp, config smtp, enable smtp command
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual disable smtp Purpose Syntax Description Parameters Restrictions Used to disable the Switch as a SMTP client. disable smtp This command, in conjunction with the enable smtp command will enable and disable the Switch as a SMTP client without changing configurations. None. Only administrator-level users can issue this command. Example usage: To disable SMTP on the Switch. DES-3026:4#disable smtp Command: disable smtp Success. DES-3026:4# config smtp Purpose Syntax Description Parameters Restrictions Example usage: Used to configure necessary information in setting up the Switch as an SMTP client. config smtp {server | server_port | self_mail_addr | [add mail_receiver | delete mail_receiver ]} This command will allow the user to set the necessary parameters to configure the SMTP server and mail recipients. This command must be completely configured properly for the SMTP function of the switch to correctly operate. server - Enter the IP address of the SMTP server on a remote device. server_port - Enter the virtual port number that the Switch will connect with on the SMTP server. The common port number for SMTP is 25. self_mail_addr - Enter the e-mail address from which mail messages will be sent. This address will be the from address on the e-mail message sent to a recipient. Only one self mail address can be configured for this Switch. This string can be no more that 64 alphanumeric characters. add mail_receiver - Choose this parameter to add mail recipients to receive e-mail messages from the Switch. Up to 8 e-mail addresses can be added per Switch. delete mail_receiver - Choose this parameter to delete mail recipients from the configured list receiving e-mail messages from the Switch. Up to 8 e-mail addresses can be added per Switch. Only administrator-level users can issue this command. 51