D-Link DES-3026 Reference Manual - Page 62
disable autoconfig, show autoconfig, Command: disable autoconfig
UPC - 790069280771
View all D-Link DES-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
DES-3000 Series Layer 2 Switch CLI Reference Manual disable autoconfig Purpose Use this to deactivate autoconfiguration from DHCP. Syntax disable autoconfig Description This instructs the Switch not to accept autoconfiguration instruction from the DHCP server. This does not change the IP settings of the Switch. The ipif settings will continue as DHCP client until changed with the config ipif command. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To stop the autoconfiguration function: DES-3026:4#disable autoconfig Command: disable autoconfig Success. DES-3026:4# NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a DHCP client. Use the show switch command to display the new IP settings status. show autoconfig Purpose Used to display the current autoconfig status of the Switch. Syntax show autoconfig Description This will list the current status of the autoconfiguration function. Parameters None. Restrictions None. Example usage: To show the autoconfig configuration set on the Switch: DES-3026:4#show autoconfig Command: show autoconfig Autoconfig disabled. DES-3026:4# 58