D-Link DES-3526 Product Manual - Page 142
IP-MAC Binding Table, IP-MAC Binding Table window, Parameter, Description, IP Address
UPC - 790069265969
View all D-Link DES-3526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
xStack® DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual IP-MAC Binding Table The window shown below can be used to create IP-MAC binding entries. Enter the IP and MAC addresses of the authorized users in the appropriate fields and click Add. To modify either the IP address or the MAC address of the binding entry, make the desired changes in the appropriate field and Click Modify. To find an IP-MAC binding entry, enter the IP and MAC addresses and click Find. To delete an entry click Delete. To clear all the entries from the table click Delete All. To view this window click, Configuration > IP-MAC Binding > IP-MAC Binding Table. Figure 6- 106. IP-MAC Binding Table window The following fields can be set or modified: Parameter Description IP Address MAC Address All Ports Ports Mode Enter the IP address you wish to bind to the MAC address set below. Enter the MAC address you wish to bind to the IP Address set above. Click this check box to configure this IP-MAC binding entry (IP Address + MAC Address) for all ports on the Switch. Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC Address). The user may set the IP-MAC Binding Mode here by using the pull-down menu. The choices are: ARP - Choosing this selection will set a normal IP-Mac Binding entry for the IP address and MAC address entered. ACL - Choosing this entry will allow only packets from the source IP-MAC binding entry created here. All other packets with a different IP address will be discarded by the Switch. This mode can only be used if the ACL Mode has been enabled in the IP-MAC Binding Ports window as seen previously. 127