D-Link DFE-550FX User Guide - Page 11

D-Link DFE-550FX Adapter Installation Installation of the DFE-550FX 100 Mbps Adapter requires installing the hardware first. Once the interface card has been installed into the host computer, the software can be installed. Unpacking CAUTION: Under ordinary circumstances, a DFE-550FX interface card will not be affected by static electricity. However, it is good practice to eliminate static charges by touching a sizable metal object before handling the adapter card. Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have: • One DFE-550FX Adapter. • DFE-550FX Software Diskette. Installing the Adapter 1. Shut down the computer, unplug its power cord, and remove the cover. 2. If your order does not include the Boot ROM option, go ahead to Step 3. If your order includes the Boot ROM option, then install the Boot ROM Chip by plugging the chip into the Boot ROM Socket on the DFE-550FX card. The notched end of the Boot ROM Chip must be aligned with the notched end of the Boot ROM Socket. Opposite alignment will destroy the Boot ROM Chip! 3. Firmly insert the contact edge of the DFE-550FX card into any 4