D-Link DFL-860E CLI Guide for DFL-260E - Page 53
Source TCP/UDP port filter.
![]() |
View all D-Link DFL-860E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2.2.40. pipes Chapter 2. Command Reference -ipdest= -ipsrc= -ipversion= -out -out-nocap -port= -promisc -proto= -show -size= -snaplen= -srcport= -start -status -stop -tcp -udp -wipe -write Destination IP address filter. Source IP address filter. IP version filter. Realtime packet brief dumped to console. Unbuffered (not stored in memory) realtime packet brief dumped to console. TCP/UDP port filter. Set iface in promiscuous mode. IP protocol filter. Show a captured packets brief. Size (kb) of buffer to store captured packets in memory (default 512kb). Maximum length of each packet to capture. Source TCP/UDP port filter. Start capture. Show capture status. Stop capture. TCP filter. UDP filter. Remove all captured packets from memory. Write the captured packets to disk. Name of interface(s). Note Requires Administrator privilege. 2.2.40. pipes Show pipes information. Description Show list of configured pipes / pipe details / pipe users. Note: The "pipes" command is not executed right away; it is queued until the end of the second, when pipe values are calculated. Usage 53
![](/manual_guide/products/dlink-dfl260e-cli-guide-dfl260e-d8f35b3/53.png)