D-Link DGS-1210-20 Reference Guide - Page 49
L2 Functions > SNTP > TimeZone Settings, L2 Functions > LLDP > LLDP Global Settings
View all D-Link DGS-1210-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 Configuration D-Link Web Smart Switch User Manual Click Apply to implement changes made. When selecting Local for the clock source, users can select from one of two options: Manually set current time: Users input the system time manually. Set time from PC: The system time will be synchronized from the local computer. L2 Functions > SNTP > TimeZone Settings The TimeZone Setting Page is used to configure time zones and Daylight Savings time settings for SNTP. Figure 5.49 - L2 Functions > SNTP > TimeZone Settings Daylight Saving Time State: Enable or disable the DST Settings. Daylight Saving Time Offset: Use this drop-down menu to specify the amount of time that will constitute your local DST offset - 30, 60, 90, or 120 minutes. Time Zone Offset GMT +/- HH:MM: Use these drop-down menus to specify your local time zone's offset from Greenwich Mean Time (GMT.) Daylight Saving Time Settings: From: Month / Day: Enter the month DST and date DST will start on, each year. From: HH:MM: Enter the time of day that DST will start on, each year. To: Month / Day: Enter the month DST and date DST will end on, each year. To: HH:MM: Enter the time of day that DST will end on, each year. Click Apply to implement changes made. L2 Functions > LLDP > LLDP Global Settings LLDP (Link Layer Discovery Protocol) provides IEEE 802.1AB standards-based method for switches to advertise themselves to neighbor devices, as well as to learn about neighbor LLDP devices. SNMP utilities can learn the network topology by obtaining the MIB information in each LLDP device. The LLDP function is enabled by default. Figure 5.50 - L2 Functions > LLDP > LLDP Global Settings 44