D-Link DGS-1210-20 Reference Guide - Page 52
L2 Functions > LLDP > LLDP Management Address Settings, From Port/To Port
![]() |
View all D-Link DGS-1210-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 5.54 - L2 Functions > LLDP > 802.3 Extension TLV Port Settings From Port/To Port: A consecutive group of ports may be configured starting with the selected port. MAC/PHY Configuration/Status: Specifies whether the MAC/PHY Configuration Status is enabled on the port. The possible field values are: Enabled - Enables the MAC/PHY Configuration Status on the port. Disabled - Disables the MAC/PHY Configuration Status on the port. Power via MDI: Advertises the Power via MDI implementations supported by the port. The possible field values are: Enabled - Enables the Power via MDI configured on the port. Disabled - Disables the Power via MDI configured on the port. Link Aggregation: Specifies whether the link aggregation is enabled on the port. The possible field values are: Enabled - Enables the link aggregation configured on the port. Disabled - Disables the link aggregation configured on the port. Maximum Frame Size: Specifies whether the Maximum Frame Size is enabled on the port. The possible field values are: Enabled - Enables the Maximum Frame Size configured on the port. Disabled - Disables the Maximum Frame Size configured on the port. Define these parameter fields. Click Apply to implement changes made and click Refresh to refresh the table information. L2 Functions > LLDP > LLDP Management Address Settings The LLDP Management Address Settings allows the user to set management address which is included in LLDP information transmitted. Figure 5.55 - L2 Functions > LLDP > LLDP Management Address Settings From Port/To Port: A consecutive group of ports may be configured starting with the selected port. Address Type: Specify the LLDP address type on the port. The value is always IPv4. Address: Specify the address. Port State: Specify whether the Port State is enabled n the port. The possible field values are: 47
![](/manual_guide/products/dlink-dgs121028p-reference-guide-ec3fe2b/52.png)