D-Link DGS-3024 Product Manual - Page 38
Advanced Settings - dgs default ip address
UPC - 790069273889
View all D-Link DGS-3024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
DGS-3024 Gigabit Ethernet Switch Manual Advanced Settings The Switch Information (Advanced Settings) window contains the main settings for all major functions for the Switch. To view this window, click its link in the Configuration folder. This will enable the following window to be viewed and configured. Figure 7- 3. Switch Information (Advanced Settings) window The following fields can be set: Parameter Description Serial Port Auto Logout This setting for the restart of the console is 2 Minutes, 5 Minutes, 10 Minutes, 15 Minutes, or Never. The default is 10 Minutes. Serial Port Baud Rate Determines the serial port bit rate that will be used the next time the Switch is restarted. Available speeds are 9600, 19,200, 38,400, and 115,200 bits per second. The default setting is 9600. MAC Address Aging Time (014400) Minutes This field specifies the length of time a learned MAC Address will remain in the forwarding table without being accessed (that is, how long a learned MAC Address is allowed to remain idle). To change this, type in a different value representing the MAC address age-out time in seconds. The MAC Address Aging Time can be set to any value between 0 and 14,400. The default setting is 5. IGMP Snooping Multicast Router Only This indicates if Internet Group Management Protocol (IGMP) Snooping is enabled on the Switch. When enabled, this feature instructs the Switch to read IGMP packets being forwarded through the Switch in order to obtain forwarding information from them (learn which ports contain Multicast members). The Switch's IGMP snooping state can be changed on the IGMP Snooping Settings window (Configuration → IGMP Snooping → IGMP Snooping). The default is Disabled. This field specifies that the Switch should only forward all multicast traffic to a multicast-enabled router, if enabled. Otherwise, the Switch will forward all multicast traffic to any IP router. The default is Disabled. 24