D-Link DGS-3650 Product Manual - Page 48
Time Settings, Administration, SNTP Settings
UPC - 790069293603
View all D-Link DGS-3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch SNTP Settings Time Settings This window is used to configure the time settings for the Switch. To view this window, click Administration > SNTP Settings > Time Settings, as shown below: Figure 2- 30. Time Settings window The following parameters can be set or are displayed: Parameter Description System Boot Time Current Time Displays the time when the Switch was initially started for this session. Current Time Displays the Current Time set on the Switch. Time Source Displays the time source for the system. SNTP Settings SNTP State Use this pull-down menu to Enabled or Disabled SNTP. SNTP Primary Server This is the IP address of the primary server the SNTP information will be taken from. SNTP Secondary Server This is the IP address of the secondary server the SNTP information will be taken from. SNTP Poll Interval in This is the interval, in seconds, between requests for updated SNTP information. Seconds (30-99999) Set Current Time Year Month Enter the current year to update the system clock. Enter the current month to update the system clock. 32