D-Link DHP-1320 User Manual - Page 92
Time, Time Zone, Enable Daylight, Saving, Enable NTP Server, NTP Server Used, Set the Time
View all D-Link DHP-1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Section 3 - Configuration Time The Time window allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time Zone: Select the Time Zone from the drop-down menu. Enable Daylight Check this box if the country your are located in uses Saving: Daylight Saving time. Enter a start date and an end date for daylight saving time. Enable NTP Server: Check this box to enable the NTP Server. NTP Server Used: NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. To enable NTP carry out the following: 1. Check the Automatically synchronize with D-Link's Internet Time Server box. 2. Choose the D-Link NTP server that you would like to synchronize with from the NTP Server Used drop-down menu. Set the Time and Use this section to configure the time manually. To Date Manually: configure the time manually, use the drop-down menus to select the appropriate Year, Month, Day, Hour, Minute, and Second. Click the Save Settings button to save any changes made. D-Link DHP-1320 User Manual 87