D-Link DIS-3650AP Quick Install Guide - Page 3

ENGLISH Before You Begin System Requirements This installation guide provides instructions for installing the DIS-3650AP on your network. Additional documentation is also available on the D-Link support website. • Nuclias Connect Manual: For additional information and instructions on how to configure the device using Nuclias Connect. • DIS-3650AP User Manual: For additional information and instructions on how to configure the device using the web user interface. Package Contents This DIS-3650AP package includes the following items: • Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter Hardware Overview LED Indicators 1 2 3 4 • DIS-3650AP Access Point • Quick Start Guide • Mounting kit (Wall/Pole/DIN Rail Mount) - Articulation Pole x 1 - T-form Bracket x 1 - M8x40 Screw Bolts x 1 - M6 Screw x 4 - M8 Nut x 1 - Washer (M8 x 1 ; M6 x 4) - Spring Washer (M8 x 1 ; M6 x 4) - Stainless Hose Clamp x 2 - Anchors plastic screws x 4 - Stainless screws x 4 - DIN Rail mounting kit If any of the above items are damaged or missing, please contact your local D-Link reseller. Note: To power the unit, use an 802.3at PoE Switch or PoE Injector. Figure 1: Side Panel LED # LED Description Green (Solid) - Device operational 1 Power/ Status Red (Flashing) - Device booting up/ Device malfunctioned Red (Solid) - Device boot up has failed 2 2.4 Solid green - 2.4GHz is enabled Blinking green - data transmission 3 5G Solid green - 5GHz is enabled Blinking green - data transmission 4 LAN (PoE) Indicates whether a device is connected to LAN and receiving power on the PoE port. Table 1: LED Description DIS-3650AP Quick Installation Guide 1