D-Link DKVM-4 Product Manual - Page 3

Introduction Thank you for purchasing the DKVM-2/4 KVM Switch. This product will ensure easy and accurate control over 2 or 4 PCs through a single console. The DKVM-2/4 is compatible with mice and keyboard with PS/2 type connectors. Older style keyboards or mice can be used with PS/2 adapters in the case that the device is PS/2 compatible. Most older style serial keyboard and mice are not compatible with PS/2. Advanced features like keyboard and mouse emulation for error free boot-ups and support is also provided for the Microsoft Intellimouse and Microsoft Intellimouse Explorer. The DKVM-2/4 supports high resolutions. Resolutions up to 1920 x 1440 are supported with no deterioration of image quality. Switching between PCs can be accomplished in two ways: through keyboard "Hot Key" commands or by using the convenient front-panel "Select" pushbutton controls. Product Features § Allows a user to control 2/4 computers from one console. § Works with DOS, Windows, OS/2, UNIX, Linux etc. § No drivers or other additional software required. § Keyboard and mouse emulation allows error-free boot-up. § The status of the CAPS LOCK, SCROLL LOCK and NUM LOCK keys is preserved for each of the computers. § Uses inexpensive and commonly available cables. Molded KVM cables are recommended. Model No. DKVM-CB § Supports Monitor resolutions of up to 1920 x 1440. § Supports VGA, SVGA and Multisync monitors. § "Select" push-button or keyboard "Hot Key" control. § Comes with Auto-Scan mode for convenient automatic switching. § Front panel status LEDs give a clear indication of the active PC. § Audible feedback when switching between computers. 1