D-Link DKVM-4K Product Manual - Page 9

KEYBOARD "HOT KEY COMMANDS To send "Hot Key" commands to the DKVM-2/4 unit, press the SCROLL LOCK Key twice within 2 seconds. You will be given a beep as confirmation. Now press a command key to give a "Hot Key" command. The following commands are supported: FIRST KEY SECOND KEY THIRD KEY SCROLL LOCK SCROLL LOCK 1 SCROLL LOCK SCROLL LOCK 2 SCROLL LOCK SCROLL LOCK 3 SCROLL LOCK SCROLL LOCK 4 SCROLL LOCK SCROLL LOCK ? SCROLL LOCK SCROLL LOCK ? SCROLL LOCK SCROLL LOCK S COMMAND Switch to First PC Switch to Second PC Switch to Third PC Switch to Fourth PC Switch to Previous PC Switch to Next PC Go to Auto Scan mode In Auto-Scan mode, the DKVM-2/4 unit will switch to the next computer every 10 seconds. This means that all computers will be shown on the monitor in a row, starting with the first computer after the last one has been shown. In this mode, there is no mouse or keyboard control, which is needed to prevent errors. Erratic input will result if a mouse move or keyboard key press is given just as the unit switches to the next computer. To exit Auto-Scan mode, press the SPACE BAR. The DKVM-2/4 will stop at the last computer shown. OPTIONAL CABLE Model No. DKVM-CB 6 feet (180cm) 3 -in-one Cable kit is available for DKVM-2/4 KVM switch. Visit www.dlinkshop.com for details. 7