D-Link DNR-326 User Manual - Page 24
Network Setup - default ip
View all D-Link DNR-326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Section 3 - Configuration Network Setup Network Setup allows you to configure the LAN settings for your NAS device. DHCP: Select this connection if you have a DHCP server running on your network and would like a dynamic IP address to be automatically updated to your NVR. Static IP: You may obtain a static or fixed IP address and other network information from your network administrator for your NVR. A static IP address will simplify access to your NVR in the future. IP Address: The fixed IP address. Subnet Mask: The default value 255.255.255.0 is used to determine if the destination is in the same subnet. Gateway IP The gateway forwards frames to destinations in a Address: different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary domain name server that translates names DNS1: to IP addresses. Secondary domain name server to backup the DNS2: primary one. Enable this setting if your ISP (DSL service) is using PPPoE PPPoE. You may already have a Username and Settings: Password provided by your ISP, or you may need to contact your ISP. The connection status will be determined automatically by the system. Enable or disable the DHCP server. If your network DHCP server: doesn't have DHCP server, enable NVR DHCP server for easier local network setup. D-Link DNR-326 User Manual 20