D-Link DNR-326 User Manual - Page 31
Set Recording Schedule Configuration, Step 1, Start Time, End Time, Insert, event trigger recording.
View all D-Link DNR-326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 3 - Configuration Recording Schedule Set Recording Schedule Configuration Step 1: Enter the desired Start Time and End Time. Step 2: Enter pre-record period and post-record for event trigger recording. Step 3: Check the enable audio box to record audio from your camera (if supported). Step 4: Choose the recording mode and the trigger source. Step 5: Click OK to add this new schedule. Step 6: If you would like to add another new schedule, click the Insert button. Note: • When configuring the Motion Detection event, be sure to set up the motion detection function on your camera first. • After changing the motion detection settings of your camera, be sure to disconnect the camera from the NVR and then re-connect it to update all new changes. • Alternatively users can drag the time bar to change the recording period. The red bar represents the Always Record feature and the blue bar represents the Event Recording feature. D-Link DNR-326 User Manual 27