D-Link DP-311P Product Manual - Page 14
Configuration > Management, SNMP Community Settings, SNMP Trap Settings - support
UPC - 790069257094
View all D-Link DP-311P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the Web Configuration (continued) Configuration > Management SNMP (Simple Network Management Protocol) is a set of protocols for managing complex networks SNMP Community Settings Support HP WebJet Admin: Select Enable or Disable SNMP Community Name 1: Enter a name Access Right: Select from the pull-down menu Read-Only or Read-Write SNMP Community Name 2: Enter a name Access Right: SNMP Trap Settings Select from the pull-down menu Read-Only or Read-Write Send SNMP Traps: Select Enable or Disable Use Authentication Traps: Select Enable or Disable Send Traps to IP Address 1: Input an IPAddress for receiving Traps Send Traps to IP Address 2: Input an IPAddress for receiving Traps 14
14
Using the
Web Configuration (continued)
Configuration > Management
SNMP Community Settings
Support HP WebJet Admin:
SNMP Community Name 1:
Enter a name
Access Right:
Select from the pull-down menu
Read-Only or Read-Write
Select Enable or Disable
Send Traps to IP Address
2:
Send SNMP Traps:
Use Authentication Traps:
Send Traps to IP Address 1:
Input an IP Address for receiving Traps
Select Enable or Disable
Input an IP Address for receiving Traps
SNMP Trap Settings
Select Enable or Disable
SNMP
(Simple
Network
Management
Protocol) is a
set of protocols
for managing
complex
networks
Access Right:
Select from the pull-down menu
Read-Only or Read-Write
SNMP Community Name 2:
Enter a name