D-Link DSL-100D User Guide - Page 13

Hardware Installation

Get D-Link DSL-100D - 8 Mbps DSL Modem PDF manuals and user guides
UPC - 790069225116
View all D-Link DSL-100D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Step 1 Hardware Installation The card must be installed on the computer's mainboard. Since this is an electrical device, safety is important. First, properly shutdown the computer and unplug the computer's power cord. Touch an unpainted screw on the back of the power supply with the tip of your screwdriver to discharge any static electricity and prevent possible damage to the card and computer components. Open the computer's case. Insert the card into an open PCI slot. Insert the card straight in and gently push straight down until it seats firmly and has good connection. Screw the bracket on the back of the card to the case so the card is firmly held in place. Put the case back on the computer and plug the power cord back in. The physical installation of the card is now complete. Figure 1: Insert the card into the PCI slot. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
5
Step 1
Hardware Installation
The card must be installed on the computer’s mainboard. Since this is an electrical device,
safety is important. First, properly shutdown the computer and unplug the computer’s power
cord. Touch an unpainted screw on the back of the power supply with the tip of your
screwdriver to discharge any static electricity and prevent possible damage to the card and
computer components. Open the computer’s case.
Insert the card into an open PCI slot. Insert the card straight in and gently push straight down
until it seats firmly and has good connection. Screw the bracket on the back of the card to the
case so the card is firmly held in place.
Put the case back on the computer and plug the power cord back in. The physical installation
of the card is now complete.
Figure 1: Insert the card into the PCI slot.