D-Link DSN-2100-10 Hardware Reference Guide for DSN-2100-10 Valid for fir - Page 23
Appendix A Replacing and Upgrading FRUs
![]() |
UPC - 790069310638
View all D-Link DSN-2100-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Appendix A Replacing and Upgrading FRUs This appendix describes how to replace or upgrade the Field Replaceable Units (FRUs) in your xStack Storage Array. FRUs that can be replaced or upgraded include: Battery Pack System and buffer memory SATA drives Fans Power supplies A.1 Installing the Battery Pack The xStack Storage Array accommodates a 4-cell or 6-cell shrink-wrapped battery pack. Because write-back caching is always enabled, we recommend you have a battery to back up the buffer cache contents. To install a battery in your xStack Storage SAN Array, follow these steps: 1. Hold the battery as shown to align the fastener pad. Make sure the battery cable and connector is located nearest to the battery socket J35 on the controller (see Figure A-1 ). Figure A-1 Aligning the Battery DSN-2100 Hardware Reference Guide 23
![](/manual_guide/products/dlink-dsn210010-hardware-reference-guide-dsn210010-valid-firmware-200119-later-89d951a/23.png)