D-Link DSN-2100-10 Hardware Reference Guide for DSN-2100-10 Valid for fir - Page 28
Installing or Replacing SATA Drives, A.3.1 Drive and Tray Removal
![]() |
UPC - 790069310638
View all D-Link DSN-2100-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
A.3 Installing or Replacing SATA Drives Removal of a populated drive/tray assembly can have unforeseen effects including the loss of all data in a volume. A drive can be part of a volume that may or may not be redundant. Before removing a drive from an operating xStack Storage Array, make sure it is the correct one. A.3.1 Drive and Tray Removal A drive/tray assembly can be removed by pressing upwards on the green latch found on the tray and removing it with the handle as shown in Figure A-7 and Figure A-8. Figure A-7 Drive and Tray Removal Figure A-8 Remove Drive/Tray 28 Appendix A Replacing and Upgrading FRUs
![](/manual_guide/products/dlink-dsn210010-hardware-reference-guide-dsn210010-valid-firmware-200119-later-89d951a/28.png)
28
Appendix A Replacing and Upgrading FRUs
A.3
Installing or Replacing SATA Drives
Removal of a populated drive/tray assembly can have unforeseen effects
including the loss of all data in a volume.
A drive can be part of a volume
that may or may not be redundant.
Before removing a drive from an
operating xStack Storage Array, make sure it is the correct one.
A.3.1 Drive and Tray Removal
A drive/tray assembly can be removed by pressing upwards on the green latch found on the
tray and removing it with the handle as shown in Figure A-7 and Figure A-8.
Figure A-7
Drive and Tray Removal
Figure A-8
Remove Drive/Tray