D-Link DSN-3200 Light Fix - Page 6
If you see - d link 10
 |
UPC - 790069299759
View all D-Link DSN-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
xStack Storage DSN-3200 & DSN-3400 ECN - Drive Activity Light Fix Figure 5: A bare chassis backplane showing the four 10-position headers Step 7) If you see a jumper block installed on each of these four headers like that shown in Figure 6, then you will need to proceed to Section 2 for instructions on installing the new resistor packs. If you see a modified jumper like that found in figure 7, then your system has been modified with the necessary resistor packs. You may close your unit's cover and return to normal operation. Figure 6: A jumper block installed on a 10-position jumper D-Link Systems, Inc. February 7, 2008 Page 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
 |
 |
xStack Storage DSN-3200 & DSN-3400
ECN – Drive Activity Light Fix
D-Link Systems, Inc.
Page
6
February 7, 2008
Figure 5: A bare chassis backplane showing the four 10-position headers
Step 7) If you see a jumper block installed on each of these four headers like that shown in Figure 6, then
you will need to proceed to Section 2 for instructions on installing the new resistor packs.
If you see a
modified jumper like that found in figure 7, then your system has been modified with the necessary resistor
packs.
You may close your unit’s cover and return to normal operation.
Figure 6: A jumper block installed on a 10-position jumper