D-Link DWL-2100AP Product Manual - Page 9
Before You Begin, Connect to Your Network - default address
UPC - 790069285950
View all D-Link DWL-2100AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Before You Begin It's best to use a computer (with an Ethernet adapter) that is connected to a switch or router for configuring the DWL-2100AP. The default IP address for the DWL-2100AP is 192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-2100AP's IP address for the purpose of configuring the DWL-2100AP. See the Appendix if you need assistance in assigning a Static IP address for your network adapter. Connect to Your Network A. First, connect the power adapter to the receptor at the back panel of the DWL-2100AP and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Insert one end of the cable to the Ethernet port on the back panel of the DWL-2100AP and the other end of the cable to your network (switch or router). Note: You also have the option of connecting the DWL-2100AP directly to the computer that will be used for configuration. The Link LED light will illuminate to indicate a proper Ethernet connection. (Note: The Ethernet Port on the DWL-2100AP is Auto-MDI/MDIX. Meaning you can use a straight-through or crossover Ethernet cable to connect to the Ethernet port on the DWL-2100AP.) C. The DWL-G650 Wireless Cardbus Adapter and the DWL-G520Wireless PCI Adapter will connect, out of the box, with the DWL-2100AP, using their default wireless settings. Computers with 802.11b wireless adapters can also connect to the DWL-2100AP. DWL-2100AP User Manual