D-Link DWL-6600AP Users Manual - Page 112

Unified Access Point Administrator's Guide Configuring SNMPv3 Views Table 43 describes the fields you can configure on the SNMPv3 Views page. Field View Name Type OID Mask SNMPv3 Views Table 43: SNMPv3 Views Description Enter a name to identify the MIB view. View names can contain up to 32 alphanumeric characters. Specifies whether to include or exclude the view subtree or family of subtrees from the MIB view. Enter an OID string for the subtree to include or exclude from the view. For example, the system subtree is specified by the OID string .1.3.6.1.2.1.1. The OID mask is 47 characters in length. The format of the OID mask is xx.xx.xx (.)... or xx:xx:xx.... (:) and is 16 octets in length. Each octet is 2 hexadecimal characters separated by either . (period) or : (colon). Only hex characters are accepted in this field. For example, OID mask FA.80 is 11111010.10000000. A family mask is used to define a family of view subtrees. The family mask indicates which sub‐identifiers of the associated family OID string are significant to the family's definition. A family of view subtrees allows control access to one row in a table, in a more efficient manner. This field shows the MIB views on the UAP. To remove a view, select it and click Remove. Note: After you configure the SNMPv3 Views settings, you must click Apply to apply the changes and to save the settings. D-Link November 2011 Unified Access Point Administrator's Guide Page 112