D-Link DWL-G650M Product Manual - Page 14

Configuration, Wireless Mode, Channel, Tx Rate, Power Mode, Preamble

Get D-Link DWL-G650M - Super G With MIMO PDF manuals and user guides
UPC - 790069273964
View all D-Link DWL-G650M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

DWL-G650M User's Manual Configuration Using the Configuration Utility SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default. Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Getting Started section in this manual for an explanation of these two modes.) Channel: The channel selection is automatically determined by the DWL-G650M. When in Ad-Hoc mode, you may select a channel manually. The default channel is 6. Tx Rate: The default setting is Auto. These settings are automatically determined for the maximum wireless signal rate. Preamble: Preamble Type - By default the preamble is set to Short and Long Preamble. The preamble defines the length of the CRC block (Cyclic Redundancy Check) used in communication between the access point and the wireless network adapters. CRC is a common technique for detecting data transmission errors. High traffic networks should use the shorter preamble type. The DWL-G650M will automatically determine the best Preamble length. Power Mode: Continuous Access Mode is the default setting. For best results leave this setting at the default. D-Link Systems, Inc. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
14
DWL-G650M User’s Manual
D-Link Systems, Inc.
Using the Configuration Utility
SSID:
Wireless Mode:
Channel:
Tx Rate:
The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is
default
.
Either
Infrastructure
or
Ad-Hoc
will be displayed here. (Please see
the
Getting Started
section in this manual for an explanation of these
two modes.)
The channel selection is automatically determined by the
DWL-G650M. When in Ad-Hoc mode, you may select a channel
manually. The default channel is 6.
Configuration
The default setting is Auto. These settings are automatically
determined for the maximum wireless signal rate.
Preamble Type
- By default the preamble is set to
Short and Long
Preamble
. The preamble defines the length of the CRC block
(Cyclic Redundancy Check) used in communication between the
access point and the wireless network adapters. CRC is a common
technique for detecting data transmission errors. High traffic
networks should use the shorter preamble type. The
DWL-G650M will automatically determine the best Preamble length.
Continuous Access Mode is the default setting. For best results leave
this setting at the default.
Power Mode:
Preamble: