D-Link DXN-221 User Manual - Page 11

Section 2 - Installation Hardware Installation Power Plug the DXN-220 into an AC wall outlet or power strip. Note: Power source is confirmed when the green LED Power indicator on the DXN-220 is illuminated. Connect the Ethernet Cable Connect the included Ethernet cable to the LAN port located on the DXN-220 and attach the other end of the Ethernet cable to the network or PC. Connect the Coaxial Cable Connect a coaxial cable to the Coax I/O port located on DXN-220 and attached the other end of the coax cable to your cable jack inside the house. Note: Please make sure the DXN-220's configuration switch is in MoCA mode. Coaxial Network Connectivity is confirmed when the green LED COAX indicator on the DXN-220 is illuminated. If there is TV service being received in the room and you wish to continue viewing the service, connect the other coax cable to the TV Out port on the DXN-220 and attach the other end of the coax cable to your television, Set-top Box (STB), or VCR as desired. Refer to the diagram on the next page. D-Link DXN-220 User Manual 11