D-Link tm-g5240 User Manual - Page 77

T-Mobile TM-G5240 Wireless Router User Manual Version 0.7 041807 When running the CD Install Wizard I can't get past the cabling steps This means the computer you are running the CD with can not communicate with the wireless router. Try the following: 1. Check that your cables are correct based on the images in the CD Wizard and then see the text in the troubleshooting issue I can't connect to the internet. 2. Re-run the CD, ensure all lights are on for the router before moving past step 9. I'm prompted for a username and password when opening my Web browser It is most likely that your DSL (PPPoE) software installed on your computer is requesting this information. Since the TM-G5240 will now authenticate and connect you to your DSL service, you must disable or uninstall any PPPoE software from your computer. PPPoE software will not work behind your TM-G5240. Please contact your Internet Service Provider for assistance. I want to use a broadband modem with a USB connection The TM-G5240 only works with a modem with an Ethernet connection. Most modems will offer both USB and Ethernet. Disconnect the USB connection before starting the installation procedure. If your modem has only a USB connection, contact your Internet Service Provider for assistance. The CD will not run when I insert it into the CD-ROM drive The autorun function of your CD drive may be disabled. To manually launch the Setup Wizard: 1. On your computer, click Start > Run. 2. At the Run box, type d:/Installation_Wizard.exe (d is the drive letter for your CD- ROM drive). 3. Click OK to start the Setup Wizard. 74