D-Link tm-g5240 User Manual - Page 79
I want to modify TM-G5240 settings, Reset to factory default setting - password default
UPC - 610214612892
View all D-Link tm-g5240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
I want to modify TM-G5240 settings T-Mobile TM-G5240 Wireless Router User Manual Version 0.7 041807 To modify settings, you must log on to the TM-G5240: 1. Open your Web browser and type the IP address of the TM-G5240 in the address bar. The default IP address is 192.168.0.1. You are prompted for your password. 2. Type your password. Default password is admin. Reset to factory default setting After you have tried other methods for troubleshooting your network, you may choose to reset the TM-G5240 to the factory default settings. Perform the following to hard-reset the TM-G5240 to factory default settings: 1. Ensure the router has power and the status lights are on. 2. Locate the Reset button on the back of the TM-G5240. 3. Use a paper clip, press and hold in the Reset button. 4. Hold for about 10 seconds, until the status lights flash off, then release. 5. When the status lights are all back on the router is fully reset. After the TM-G5240 resets (may take a few minutes), it will be reset to the factory default settings. Reset button 76