Dacor DR30G Installation Instructions - Page 9

Self-Rimming Installation Cutout Options Models DR30GIS and DR30GIFS Only

Page 9 highlights

Installation Specifications Self-Rimming Installation Cutout Options (Models DR30GIS and DR30GIFS Only) For all self-rimming installations: Countertop height: 34 3/4" (88.3 cm) min.  36 7/8" (93.7 cm) max. Countertop thickness: 1 5/8" (4.1 cm) max. 10" min. (25.4 cm) to any combustibles above counter both sides Non-combustible rear wall required* 10" min. (25.4 cm) to any combustibles above counter both sides Rear wall*or countertop edge 3/4" min. (1.9 cm) countertop overhang 25 5/8" max. (65.1 cm) Countertop front 29 1/4" (74.3 cm) countertop opening 30" (76.2 cm) cabinet opening below countertop Notch countertop to width of cabinets Cabinet face below countertop 21" 20 3/4" (53.3 cm) (52.7 cm) to 24" (61.0 cm) 25 3/4" (65.4 cm) max. Countertop front 29 1/4" (74.3 cm) countertop opening 30" (76.2 cm) cabinet opening below countertop Notch countertop to width of cabinets Cabinet face below countertop 21 1/8" 20 7/8" (53.7 cm) (53.0 cm) to 24 1/8" (61.3 cm) Cabinets Less Than 24" Deep, 3 1/4" Side Panels Installed, Range Back Flush to Wall (Top View) Cabinet Depth Greater Than 24" ** 3 1/4" Side Panels Installed, Range Back Overhanging Countertop (Top View) 10" min. (25.4 cm) to any combustibles above counter both sides Non-combustible rear wall required * 10" min. (25.4 cm) to any combustibles above counter both sides Rear wall*or countertop edge 3/4" min. (1.9 cm) Countertop overhang 29 1/4" (74.3 cm) countertop opening 30" (76.2 cm) *** cabinet opening below countertop Cabinet face below countertop Notch countertop overhang to width of cabinets 24" (61.0 cm) Countertop overhang 1 5/8" (4.1 cm) max. Cabinet Exactly 24" Deep, 3 1/4" Side Panels Removed, Range Back Flush to Wall (Top View) 29 1/4" (74.3 cm) countertop opening 30" (76.2 cm)*** cabinet opening below countertop Cabinet face below countertop Notch countertop overhang to width of cabinets 24 1/8" (61.3 cm) Countertop overhang 1 5/8" (4.1 cm) max. Cabinet Depth Greater Than 24" ** 3 1/4" Side Panels Removed, Range Back Overhanging Countertop (Top View) * On models DR30GIS and DR30GIS, non-combustible surface required immediately behind range, as specified on facing page, when back of backguard is less than 2 1/2" (6.4 cm) from rear wall. ** Models DR30GIS and DR30GIS include self-rimming trim piece that attaches to back of range and covers the edge of the countertop overhang in back. *** To create a "built-in look" on the front of the cabinet, this dimension may be changed to 29 1/4" (74.3 cm), with the width at the notches remaining 30". This configuration is only for models DR30GIS and DR30GIS with side panels behind door removed. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

7
Cabinet Depth Greater Than 24” **
3 1/4” Side Panels Installed, Range Back Overhanging
Countertop (Top View)
Cabinet Depth Greater Than 24” **
3 1/4” Side Panels Removed, Range Back Overhanging
Countertop (Top View)
Cabinets Less Than 24” Deep,
3 1/4” Side Panels Installed, Range Back Flush to Wall
(Top View)
Cabinet Exactly 24” Deep,
3 1/4” Side Panels Removed, Range Back Flush to Wall
(Top View)
Non-combustible
rear wall required
countertop opening
29 1/4” (74.3 cm)
30” (76.2 cm)
cabinet opening
below countertop
below countertop
Countertop front
Cabinet face
Notch countertop
to width of cabinets
10” min. (25.4 cm)
to any combustibles
above counter both sides
21”
(53.3 cm)
to
24”
(61.0 cm)
20 3/4”
(52.7 cm)
25 5/8”
max.
(65.1 cm)
countertop opening
29 1/4” (74.3 cm)
30” (76.2 cm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
10” min. (25.4 cm)
to any combustibles
above counter both sides
Countertop overhang
1 5/8” (4.1 cm) max.
24”
(61.0 cm)
Non-combustible
rear wall required
Rear wall or
countertop edge
countertop opening
29 1/4” (74.3 cm)
30” (76.2 cm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
to width of cabinets
3/4” min. (1.9 cm)
countertop overhang
10” min. (25.4 cm)
to any combustibles
above counter both sides
21 1/8”
(53.7 cm)
to
24 1/8”
(61.3 cm)
20 7/8”
(53.0 cm)
25 3/4”
(65.4 cm)
max.
Countertop front
Rear wall or
countertop edge
countertop opening
29 1/4” (74.3 cm)
30” (76.2 cm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
3/4” min. (1.9 cm)
Countertop overhang
10” min. (25.4 cm)
to any combustibles
above counter both sides
Countertop overhang
1 5/8” (4.1 cm) max.
24 1/8”
(61.3 cm)
* On models DR30GIS and DR30GIS, non-combustible surface required immediately behind range, as specified on facing page, when
back of backguard is less than 2 1/2” (6.4 cm) from rear wall.
** Models DR30GIS and DR30GIS include self-rimming trim piece that attaches to back of range and covers the edge of the countertop
overhang in back.
*** To create a “built-in look” on the front of the cabinet, this dimension may be changed to 29 1/4” (74.3 cm)
, with the width at the
notches remaining 30”
. This configuration is only for models DR30GIS and DR30GIS with side panels behind door removed.
Countertop height: 34 3/4” (88.3 cm) min.
36 7/8” (93.7 cm) max.
Countertop thickness: 1 5/8” (4.1 cm) max.
For all self-rimming installations:
Installation Specifications
Self-Rimming Installation Cutout Options (Models DR30GIS and DR30GIFS Only)
***
***
*
*
*
*