Dacor ER30DSR Installation Instructions - Page 8

Planning the Installation Product Dimensions (continued) Product tolerances: ±1/16" (±1.6 mm), unless otherwise stated NOTE: Self-rimming models are not compatible with Dacor integral backguards. NOTE: Self-rimming models are designed to allow the trim to overlap the countertop when configured to the dimensions on page 8. 1 9/16" (40 mm) Width at front panel: 29 7/8" (758 mm) 45 5/8" (1159 mm) 28 3/16" (716 mm) 26 11/16" (678 mm) 25 11/16" (652 mm) 23 5/8" (600 mm) 23 1/8" (587 mm) Front of open door Front of handle Front edge of bullnose Front panel Rear of front panel /oven door Rear of front panel to back of chassis 1 5/16" (33 mm) to cooking surface (top of grates) from bottom of trim 35 3/4" (908 mm) to 37 7/8" (962 mm) 1 9/16" (40 mm) Width at front panel: 29 7/8" (758 mm) Self-Rimming Model ER30DSR with Standard Trim 46 1/8" (1172 mm) 28 11/16" (729 mm) 27 3/16" (691 mm) 26 3/16" (665 mm) 24 1/8" (613 mm) 23 1/8" (587 mm) Front of open door Front of handle Front edge of bullnose Front panel Rear of front panel /oven door Rear of front panel to back of chassis 1 5/16" (33 mm) to cooking surface (top of grates) from bottom of trim 35 3/4" (908 mm) to 37 7/8" (962 mm) Self-Rimming Model ER30DSR with Optional Raised Vent Trim Kit (ATK30SR) Installed 6