Dacor ER36D Use & Care Manuals - Page 31

Cleaning and Maintenance Replacing the Light Bulbs warning • To prevent electrical shock and/or personal injury, make certain that the oven and light bulb(s) are cool and that power to the oven has been turned off at the main power supply before replacing the light bulb(s). • Always make sure the lens covers are in place when using the oven. The lens covers protect the bulbs from breakage. • Replacing the lens cover without lining up the cutout with the light socket will damage the light fixture. • Do not use a screwdriver to remove the lens cover. Light bulb replacement is considered to be a homeowner maintenance operation. If the lights do not work, before replacing them, please consult the Problem Solution Guide on page 31. IMPORTANT: Do not touch the replacement halogen light bulb with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and may cause it to burn out faster than normal. To replace the light bulbs, follow these steps: 1. Replace the light bulb only with Dacor part number 100429. See page 30 for ordering information. 2. Turn off power to the range at the circuit breaker panel or fuse box. 3. Hold your hand under the lens for support and gently pry it loose using a spatula or table knife. Pull the lens cover straight out. 4. Grasp the old bulb and pull it straight out of the socket. 5. Using a glove, insert the new bulb into the socket. 6. As you reinstall the lens cover, line up the cutout on the inside rim with the light socket. Gently press it into its original position. 7. Turn the power to the range back on. Reset the clock (see page 10). Lens Light bulb Light fixture in oven wall Light socket Lens cutout 29