Dacor EWD24 Installation Instructions - Page 11

Installation Instructions Warming Drawer Control Panel Layout Verify Warming Drawer Operation 1. Connect power plug to the electrical outlet. 2. Open the drawer and press the ON/OFF key on the control panel. 3. Press the PROOF, LOW, MED and HIGH keys each in turn. When you press each key, the indicator directly above it should light. Leave the control panel set to HIGH. 4. Press the SELECT key. The 1 HOUR indicator should light. Press and release the SELECT key three (3) more times. Each time you press the SELECT key, the 2 HOUR, 3 HOUR and 4 HOUR indicator lights should come on. All lights should be on after pressing the SELECT key the third time. 5. Press the "∞" key. The indicator light above it should come on and the 1, 2 , 3 and 4 HOUR lights should go out. 6. The warming drawer should begin to heat. You should begin to feel the inside of the drawer begin to heat within five (5) to ten (10) minutes. 7. When you have determined that the heating element is working, press the ON/OFF key. If the warming drawer does not operate properly, follow these troubleshooting steps: • Verify that the circuit breaker for the electrical outlet is on and not tripped. Make sure the power plug is connected. • Repeat the above tests. • If the appliance still does not work, contact Dacor Distinctive Service at (877) 337-3226. Do not attempt to repair the appliance yourself. Be sure to have the model and serial numbers available when you call. See page 1 for model/serial number location. Dacor is not responsible for the cost of correcting problems resulting from a faulty installation. Installation Checklist warning • To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked. • Proper installation is the responsibility of the homeowner. The importance of proper installation of your warming drawer cannot be overemphasized. □□ Support platform has been installed according to the instructions on page 6. □□ Properly grounded, dedicated, three prong electrical outlet has been installed for the appliance by a licensed electrician. See page 6. □□ The chassis has been properly fastened to the support platform and sides of the cabinet. See page 7. □□ The drawer has been properly installed. See page 8. □□ Model OWD24 for use as towel warmer: The towel rack has been installed. See page 8. □□ Proper operation has been verified? □□ The warranty has been activated on-line or the warranty card filled out completely and mailed? □□ Save these instructions for future reference. 9