Dacor MRES30S Installation Instructions - Page 3
Electrical Power Supply - 30
View all Dacor MRES30S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Electrical Power Supply Requirements Product Dimensions It is the owner's responsibility to ensure that the electrical connection of this appliance is performed by a qualified electrician. The electrical installation, including minimum supply wire size and grounding, must be in accordance with the National Electric Code ANSI/NFPA 70-2002* (or latest revision) and local codes and ordinances. *A copy of this standard may be obtained from: National Fire Protection Association 1 Batterymarch Park Quincy, Massachusetts 02269-9101 Optional full size side panel The correct voltage, frequency and amperage must be supplied to the appliance from a separate, grounded, circuit that is protected by a properly sized circuit breaker or time delay fuse. 60" (1524mm) long 240 Vac 4 wire conduit location Dedicated Electrical Circuit Required 120/240Vac, 4-wire, 60Hz., 50 Amp. Total Connected Load 10.3kW (48.2 Amp.) Electrical Requirements The above electrical specifications are for reference only. See the range data plate for exact specifications. See page 1 for location. WARNING: If the electric service provided does not meet the product specifications, do not proceed with the installation. Call the selling dealer or a licensed electrician. NOTE: If the appliance is connected to a 120/208 volt power supply, preheat times and cavity temperature recovery times will be increased slightly. Removable (factory installed) 3" (76mm) side panels Dimensions - Isometric View 30" (762mm) Range top 23 1/2" (597mm) Rear of control Panel/oven door 25 5/16" (643mm) Door opened Max. depth to oven door handle with door closed 45 1/4" (1149mm) Dimensions - Top View 2