Dacor RV36 Planning Guides - Page 1

Document # PG08-003 RV30, RV36, RV46 30", 36", 46" Wide, Raised Vent Revised 03/29/10 Page 1/7 PLANNING GUIDE 1 15/16" (49 mm) 1/2" (13 mm) thick stiffener across back 1 13/16" (46 mm) Top cap with vent down 15/16" (24 mm) 3 1/8" (79 mm) 3/16" (5 mm) 9/16" (14 mm) 2" (51 mm) 2 5/16" (59 mm) warning • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • This appliance must be installed in accordance with the accompanying installation instructions. All tolerances: +1/16", -0, (+1.6 mm, -0) unless otherwise stated Model Number RV30 RV36 RV46 Vent shown in raised position 7 1/2" (191 mm) 7" (178 mm) 28" (711 mm) 26 3/4" (679 mm) to 34" (864 mm) 4 5/8" (117 mm) 9 7/8" (251 mm) with CABP3 blower installed A - Top Cap Width 30" (762 mm) 36" (914 mm) 46" (1168 mm) B - Chassis Width 27 3/8" (695 mm) 33 3/8" (848 mm) 43 3/8" (1102 mm) A B Product data label Adjustable anchor legs Front View NOTES: 1. Install these raised vents only with approved Dacor cooktops. See the planning guide for the particular appliance for proper applications and cutout information. 2. This appliance must be install in conjunction with a single Dacor approved cabinet, remote or in-line blower. See following pages for approved blowers. For detailed information on the remote and in-line blowers, refer to the blower's installation instructions. Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093 8.7