Danby DDR5011 Product Manual - Page 9

OPERATING INSTRUCTIONS (cont'd) INSTALLING PVC DRAIN HOSE When using the continuous drain function, the PVC hose must be placed horizontally below the drainage hole. Avoid uneven ground and folding the hose. NOTE: Should you damage or misplace the pvc drain hose, a standard garden hose can be used. vi CONTINUOUS DRAIN The fimction of continuous drain can be performed using the following steps: 1) To save having to periodically empty the water tank, this unit can be configured for continuous drain. You can use the supplied drain Drain hose Back of the unit Fig. A hose to connect to the continuous drain connector. 2A))Unscrew and remove the drain cover at the rear of the unit (Fig. 3) Remove the soft rubber stopper, and place it in the water tank for safe keeping (Fig. B). 4) Insert the drain hose through the hole of the drain cover (Fig. C). 5) Ensure the rubber seal ring is properly seated in the end of the hose as shown in Fig. C. Drain cover Fig. B Soft rubber stopper 'S „..--Drain cover 6) Connect the drain hose to the drain port (Fig. D). 7) Tighten the drain cover in clockwise direction onto the rear of the unit (Fig. D). Drain cover Drain hose Fig. C O 8) Place the bucket in its original location (Fig. E). ,k D Drain cover Drain hose Drain hose \ IFig. E 10" \-1-Bucket (IP