Danby DFF344WDB Product Manual - Page 7

Features

Page 7 highlights

Installation Instructions FEATURES 1 2 4 3 5 6 7 11 1) FREEZER SHELF 8 2) FREEZER TEMPERATURE CONTROL KNOB 3) LED LAMP COVER 4) REFRIGERATOR TEMPERATURE CONTROL PANEL 5) REFRIGERATOR SHELVES - Removable shelves lift up and pull towards you to remove. 9 6) CRISPER COVER 7) CRISPER 8) FREEZER BOTTLE RACK 9) REFRIGERATOR UPPER BOTTLE RACK - Not adjustable. 10) REFRIGERATOR BOTTOM BOTTLE RACK - Not adjustable. 10 11) LEVELING LEGS ICE CUBE TRAY The Ice Cube Tray is flexible. Twist tray to remove the ice cubes. If the ice cube tray is frozen solid to the evaporator surface, run a little water over the tray. Never use a knife or other metal instruments to remove the ice cube tray from freezer compartment, as this may damage the evaporator. CHANGING LED LIGHT (please follow the steps below) 1. Take off the cover. 2. Take out the LED's. 3. Put in new LED's and connect the ports. 4. Put the cover back on. Take off the light cover You will see the LED display 1 Unhook the LED display 2 3 Hook the new LED display to the port 45 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Installation Instructions
FEATURES
ICE CUBE TRAY
The Ice Cube Tray is flexible. Twist tray to remove the ice cubes. If the ice cube
tray is frozen solid to the evaporator surface, run a little water over the tray. Never
use a knife or other metal instruments to remove the ice cube tray from freezer
compartment, as this may damage the evaporator.
5
1) FREEZER
SHELF
2) FREEZER TEMPERATURE CONTROL KNOB
3) LED
LAMP COVER
4) REFRIGERATOR TEMPERATURE CONTROL PANEL
5) REFRIGERATOR
SHELVES
- Removable shelves lift
up and pull towards you to remove.
6) CRISPER COVER
7) CRISPER
8) FREEZER
BOTTLE RACK
9) REFRIGERATOR UPPER BOTTLE
RACK
- Not
adjustable.
10) REFRIGERATOR BOTTOM BOTTLE
RACK
- Not
adjustable.
11) LEVELING LEGS
1
2
3
4
5
6
7
8
9
10
11
CHANGING LED LIGHT
(please follow the steps below)
1.
Take off the cover.
2.
Take out the LED’s.
3.
Put in new LED’s and connect the ports.
4.
Put the cover back on.
Take off the light cover
You will see the LED display
Unhook the LED display
Hook the new LED display to the port
1
2
3
4
5