Danby DPAC13012H Product Manual - Page 6
nrioF
View all Danby DPAC13012H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FEATURES OF THE CONTROL PANEL lag 0 OPERATION LCD Display nrioF •11' OO°Cag 01313hr STOP KEY PAD FUNCTIONS POWER SWITCH: Turns unit ON/OFF MODE: Allows you to scroll through and select desired operating mode. FAN: Select from three different fan settings; High, Medium, and Low. AUTO-TIMER AUTO-TIMER Adjust: AUTO TURN OFF- With machine in running mode, press timer button to set timer control. Press " + " or" - "buttons to select number of hours you would like the unit to run before it automatically shuts off. NOTE: By pressing both buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit. Warning Light Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light up and the unit will not operate until it has been drained. LCD Display Cooling Mode dl Dehumidify Mode Fan Only Mode AUTO TURN ON- With machine in stand by mode, press timer button to set timer control. Press " + " or" - "buttons to select number of hours before the unit automatically starts running under any one mode. a0• Heating mode High Fan Speed Medium Fan Speed Low Fan Speed NOTE: The time is adjustable between 1-24 hours. BB Display Set Temperature TEMPERATURE Adjust: • Used for adjusting the thermostat. • The default display is room temperature. • In cooling mode, when" + "or" - "button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode. 0BBhr Display Timer Setting of Auto Switch ON / 0 FF EffE Warning Light (the machine will stop running) NOTE: After switching the air conditioner off, you must wait 3 minutes before switching it back on again.