Danby DPAC13012H Product Manual - Page 9

OPERATING INSTRUCTIONS (cont'd) FAN Note: During Fan Mode, the exhaust hose does not have to be vented outdoors. 1) Press the POWER SWITCH key to turn the unit on (Fig. J). 2) Press the MODE key (Fig. K) until the FAN indicator illuminates on the control panel (Fig. L). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-Fan-Heat). 3) Press the FAN Key (Fig. M) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each press of the fan key will advance to a different fan speed (High- Med- Low) as shown in Fig. N. Fig. K HEAT Note: During Heat Mode, the exhaust hose does not have to be vented outdoors. 1) Press the POWER SWITCH key (Fig. J) to switch on the unit, and the previous set temperature will be shown in the temperature display area of the control panel. 2) Press the MODE key (Fig. K) until the Heat indicator light illuminates on the control panel (Fig. O). Each depression of the MODE key will advance to a different mode setting (Cool- Dehumidifier- Fan- Heat). 3) Press the appropriate increase " +" or decrease - n buttons (Fig P ) to select a suitable operating temperature setting. Temperature settings are adjustable between 16°C (61°F) to 25°C (77°F). Fig. L c 4) Press the FAN key (Fig. M) to select the desired fan speed setting (High- Med.- M Low). Your selection will appear on the control panel (each depression of the fan key will advance to a different setting) • Heating stops automatically when the set temperature is achieved. Heating resumes when the room temperature rises above the "set" temperature level. Fig. 0 Fig. P1 Fig. P2 I- Fig. N MA _ Low an es Medium High