Danby DPAC5011 Product Manual - Page 10
Maintenance, Cleaning
View all Danby DPAC5011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CARE AND MAINTENANCE CLEANING THE mar CAUTION: Before cleaning or servicum this unit, disconnect from any electrical supply outlet 1) DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as these substances may cause damage to the finish and defunnation of plastic pans. 2) Never attempt to clean the unit by pouring watcr directly over any of the surface areas, as this will cause deterioration of electrical components and wiring insulation. 3) Unplug the unit. 4) Clean the emit by wiping off any dirt/dust with a soft damp cloth or vacuum cleaner, then wipe dry with a dry soft Muth. CAUTION: Atvrys store tte unit in vertical position. DONOTput heavy objects on top of the unit CLEANING THE CAUTION: Never operate this snit without the air filter in place, as this may result in AIR FILTER damage to the unit. If the ar filter becomes clogged with dust/diet, air flow is restricted, which reduces pig. cooling efficiency. The air filter should be cleaned every two (2).weeks. More frequen: cleaning may be necessary depending on indoor air quality. NOTE: The air filter is located at the upper rear side of the unit 1) To remove the air filter: Pull the air falter cover upward in the direction of the arrow (Fig. 4) and remove the air filter. 2) Dustdirt clogged in the fitter can be removed by vacuum cleaning the soiled areas. 3) The filter can also be washed in lukewarm, soapy water while rubbing it tightly with a brush. A mild detergent (diswasbing tumid) is recommended 4) Rinse the filter well using clean water. Allow time to dry before reinstalling Into the unit. 5) Replace the air filter and cover. 6) Replacement air filter information is available by contacting the Customer Service Department at: I.800-26-Dallbr(1400-263-2629). 0