Danby DPAC5011 Product Manual - Page 11

TROUBLESHOOTING Occasionally, a problem may occur that is minor, and a service call nay not be necesmty. Use this troubleshooting guide for a possible solution. If the unit continues to o rate improperly, call au autboriztxl service depot for assistance, or Danby's Ton Free Number: 1-1300-26- PROBLEM 1) Unit dour not work POSSIBLE CAUSE SOLUTIONS • • • Power is out. The 1'h tt pfulullg-taisnknoint cpklucagtgoerdisinONN;; tankL, tank is •Dutton t leakkg on LCOI a pressitig plug. test • Wait for power to return. • • RPleumgovepdrorapienrlwyater from fie drain tank. • Press the reset button after resolving problem. • Indoor set temperature has been • Reset the temperature leveL 2) Unit suddenly stops firing operation. • the reset time is lie • The Tull-tank ind:cgar is ON: tank is • Reset the timer. • Remove drain water from tae drain hill. 3) Unit runs interminently • Malfunction. • Cootactyo4mjealer. • Sturouading temp. Is too hi ow • This is ne • Exhaust duct hose is bloc • Check the duct hose. 4) Unit Function.% but the room is not cooled. • Window or door is open in room. • There is a heat sauce or too many pooplc in dm room. • • AFiilrteinr tiaskteoogrdililrtiys.clogged. • Temperature selling is too high. • • C ose More aalnlywhienadto5w01s1/d7CoWorfsr.om room. •• CRecpalancaeirthientfaiklteerg.rill. • Lower temp. setting. EL Condensed water moving the unit. spills °lit when • The mok is nearly full • Remove drain plug on rear bottom and drain out water. 0