Danby DPAC7008 User Manual - Page 11

Setting the AUTO-ON TIMER You must select all appropriate settings required to operate under the AUTO TIMED program before initiating the AUTO-ON program; • Select the appropriate MODE under which you want the unit to operate (Cool, Dehumidify or Fan). • Select the appropriate FAN SPEED setting, under which you want the unit to operate; Hi, Medium or Low. (excluding Dehumidifying, as this mode has one (1) pre-set fan speed setting only). • To set the AUTO-ON timer, the unit must be turned "off" (non-operational). 1) Press the (on/off) key pad to switch on the unit. Fig S 2) Select all appropriate operational settings (see listing above). 3) Press the (on/off) key pad to switch the unit off. Fig S 4) Press the TIMER-ON key pad (Fig T) to initiate the AUTO-ON time sequence. The "AUTOON" indicator light (Fig U) will illuminate on the control panel and the timer digits (Fig V) will appear in the display window. 5) Continually depress the key to adjust Timer On settings forward by 0.5 hour increments (0.5 ~ 24 hours). 6) To view the timer setting at any time; press the TIMER-OFF key pad again and the timer length you selected will be shown in the display window. • The unit will start automatically at the specified AUTO-ON set time. • To cancel or override the AUTO-ON program, simply turn on the unit anytime prior to when the MO AUTO-ON time is scheduled to operate. Setting the AUTO-ON & OFF timer Follow the above steps to set the auto-on timer then proceed to set the auto-off timer (see page 11). When setting the auto-on and auto off timer, the operation (running) time of the unit is the difference between the auto-on and auto-off set timer lengths. For example,to have the unit automatically power on two hours from now, then operate for one hour and power off; Set the auto-on timer length to 2 hours, and set the auto-off timer length to 3 hours, this sets the timer program for 1 hour of operation. 11