Danby DWC276BLS Product Manual - Page 12
Before You Call For Service, Problem, Possible Cause, What to
View all Danby DWC276BLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Trouble Shooting Before You Call For Service Problem No Power. Cabinet Temperature too High Condensation on the cabinet and/or doors Possible Cause A fuse in your home may be blown or the circuit breaker tripped. What to do Replace fuse or reset circuit breaker. Power surge. Unplug the wine cooler, wait a few seconds and then plug it back in. Plug not fully inserted into wall outlet Make sure the 3-prong plug on the wine cooler is fully inserted into outlet. Temperature setting Verify the temperature control setting. adjust if neccessary. Door not shut properly or opened excessively Ensure that the door is fully closed and that the gasket is sealing against the cabinet. Open the doors only as needed and for short periods of time. Interior lights toggled on The interior lights are intended for temporary lighting of cabinets for display purposes only. They are not intended to be left on for prolonged time periods. Exhaust vent is obstructed Verify there is nothing blocking the front mounted exhausting vent. Recently added a large quantity of warm bottles to the cabinet Limit the quantity of warm bottles being introduced to the cabinet at the same time. Attempt to phase in the load introduction if possible. High humidity conditions in the home. The condensation will subside once humidity conditions return to normal. Door not shut properly or opened excessively Ensure that the door is fully closed and that the gasket is sealing against the cabinet. Open the door only as needed and for short periods of time. If none of the above rectify the situation please contact our customer care department at 1-800-26- (1-800-263-2629) 11