DeLonghi EAM3200 Owner Manual - Page 28
Warning Lights, Description, Explanation, Action
View all DeLonghi EAM3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 Warning Lights: Description Explanation The light is on The water tank is empty or is steadily. positioned incorrectly. The water tank is dirty or lined with lime scale. Action Fill the water tank as described in section 11.1 of the manual. Rinse or decalcify the water tank. The light flashes. The machine cannot make the Turn the steam dial counter- espresso / coffee. clockwise. The espresso / coffee is coming Turn the adjustable grinding dial out too slowly. one click clockwise. The light is on The used coffee container is steadily. full or not in place. The used coffee container is missing. Empty the used coffee container and clean it. Open the service door and replace the used coffee container. The light flashes. The flashes. light The pre-ground coffee has not been poured into the funnel with ground coffee function selected. No more coffee beans. If the coffee grinder is noisy, it means that a small stone is blocking the coffee grinder. This indicates the presence of lime scale in the machine. Add the pre-ground coffee. Fill the container with beans. Try to remove the stone or call customer support at 1-800-322-3848 (U.S. Only). Perform the decalcification procedure described in section 15.7 of the manual. The machine makes a strange noise and the four lights , and flash alternately. After cleaning, the brewing system has probably been left out of the machine. Leave the service door closed and the brewing system out of the machine. Press the 1-cup and 2-cup buttons simultaneously until the four lights go off. Only when all of the four lights are off can the service door be re-opened and the brewing system replaced. The and lights flash alternately. The machine has just been turned on the brewing system is not inserted correctly and consequently the service door will not close properly. Press the brewing system's red buttons marked PUSH until you hear a click. Check that the two red buttons open out correctly. Close the service door and press the button. The , and lights are flashing. The machine has been turned on with the steam dial in the open position. Turn the steam dial clockwise all the way around.