DeLonghi EAM3400 Owner Manual - Page 18

Auto-start, Descale, Descaling, Completed

Get DeLonghi EAM3400 PDF manuals and user guides View all DeLonghi EAM3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

• Press the button to set the auto-start time. (If you hold the changed rapidly). • Press the button to confirm the value, • Press once and the appliance displays the message: , button down, the time is AUTO-START NO Press the button to modify the function (the appliance displays AUTO-START YES"); • Press the button to activate auto-start; • Press the button to exit programming mode or the button to change other parameters. 12.3 Descaling Over time, the continuous heating up of the water used to make the coffee leads to lime scale building up in the inner circuits of the appliance. When the appliance displays the message: DESCALE you should perform the descale cycle. Proceed as follows: • make sure the appliance is ready. • press the button (the light over the button comes on) then press the the appliance displays: button repeatedly until DESCALE NO • Press and the appliance displays the message: DESCALE YES • Press the button to start the descale program. • Empty the tank and pour in the contents of one bottle (4.2 fl. oz.) of DURGOL descaler plus 34 oz. of water. For subsequent descaling operations, descaling solution can be purchased from authorized tech- nical service centers. Note: Make sure splashes of descaler do not fall onto surfaces sensitive to acid such as marble, limesto- ne and glaze. • Place a plastic or glass container with a minimum capacity of 50 oz under the hot water spout (Fig. 3); • turn the steam knob half a turn counter-clockwise (fig.3). The descaling solution will run out of the cap- puccino frother and start to fill the container underneath. • the descale program automatically performs a series of run offs and pauses to remove lime scale depo- sits from inside the coffee maker. • After about 30 minutes, the appliance displays: DESCALing COMPLETEd TURN KNOB • Turn the steam knob a half turn clockwise as far as it will go (fig. 4). The appliance must now be rinsed through to eliminate residues of descaling solution from inside the appliance. Proceed as follows: • Remove the water tank, rinse and fill with clean water. • Reposition the tank. • Empty the collection container (under the cappuccino frother) full of liquid and then put it back under the cappuccino frother. • Turn the steam knob a half turn counter-clockwise (fig. 3). 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
17
•
Press the
button to set the auto-start time. (If you hold the
, button down, the time is
changed rapidly).
•
Press the
button to confirm the value,
•
Press
once and the appliance displays the message:
AUTO-START
NO
Press the
button to modify the function (the appliance displays AUTO-START YES");
•
Press the
button to activate auto-start;
•
Press the
button to exit programming mode or the
button to change other parameters.
12.3 Descaling
Over time, the continuous heating up of the water used to make the coffee leads to lime scale building up in
the inner circuits of the appliance.
When the appliance displays the message:
DESCALE
you should perform the descale cycle.
Proceed as follows:
•
make sure the appliance is ready.
•
press the
button (the light over the button comes on) then press the
button repeatedly until
the appliance displays:
DESCALE
NO
•
Press
and the appliance displays the message:
DESCALE
YES
•
Press the
button to start the descale program.
•
Empty the tank and pour in the contents of one bottle (4.2 fl. oz.) of DURGOL descaler plus 34 oz. of
water. For subsequent descaling operations, descaling solution can be purchased from authorized tech-
nical service centers.
Note: Make sure splashes of descaler do not fall onto surfaces sensitive to acid such as marble, limesto-
ne and glaze.
•
Place a plastic or glass container with a minimum capacity of 50 oz under the hot water spout (Fig. 3);
•
turn the steam knob half a turn counter-clockwise (fig.3). The descaling solution will run out of the cap-
puccino frother and start to fill the container underneath.
•
the descale program automatically performs a series of run offs and pauses to remove lime scale depo-
sits from inside the coffee maker.
•
After about 30 minutes, the appliance displays:
DESCALing
COMPLETEd
TURN
KNOB
•
Turn the steam knob a half turn clockwise as far as it will go (fig. 4).
The appliance must now be rinsed through to eliminate residues of descaling solution from inside the applian-
ce. Proceed as follows:
•
Remove the water tank, rinse and fill with clean water.
•
Reposition the tank.
•
Empty the collection container (under the cappuccino frother) full of liquid and then put it back under the
cappuccino frother.
•
Turn the steam knob a half turn counter-clockwise (fig. 3).