DeLonghi EAM3400 Owner Manual - Page 20

FILL TANK, GROUND TOO FINE, ADJUST, grinder, STEAM, EMPTY, used coffee, CONTAINER, INSERT used

Get DeLonghi EAM3400 PDF manuals and user guides View all DeLonghi EAM3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

• Press the button repeatedly until the number coincides with the number of red squares on the test strip (for example, if there are 3 red squares on the test strip, press the button until WATER HARD- NESS 3 is displayed). • Press the button to confirm the value. The coffee maker is now programmed to provide the desca- ling warning when necessary, based on the actual hardness of the water. 12.7 Resetting factory default settings If you change the original values, the factory default values can be reset as follows: • Press the button then press the button repeatedly until the appliance displays: RESET TO DEFAULT NO • Press the button and the appliance displays "RESET TO DEFAULT YES"; • Press the button to reset the factory default values; • Press the button to exit programming mode or to change other parameters 12.8 Washing This function can be used by technical service personnel only. 13 CHANGING THE LANGUAGE To change the language, proceed as follows: • Press the button for at least 5 seconds until the appliance displays: PRESS OK TO select ENGLISH and press the button for at least 3 seconds to confirm. The appliance then displays the setting mes- sage in English. 14 MEANING OF MESSAGES AND WHAT TO DO MESSAGE MEANING WHAT TO DO FILL TANK GROUND TOO FINE ADJUST grinder AND open STEAM • The water tank is empty or is positioned • Fill the water tank as described in chap- incorrectly. ter 5, note 6 and insert it fully. • The tank is dirty or encrusted with lime • Rinse or descale the tank. scale. • The appliance cannot make coffee • Turn the steam knob counter-clockwise (fig. 3) as described in chapter 5 note 10. • The coffee runs off too slowly. • Turn the grinding regulator (fig. 15) one click clockwise (see chapter 7). EMPTY used coffee CONTAINER INSERT used coffee • The grounds container is full or missing. • Empty the grounds container and clean as described in chapter 5, note 7, then replace. • After cleaning, the grounds container • Open the service door and insert the has not been replaced. grounds container. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
19
MESSAGE
MEANING
WHAT TO DO
FILL TANK
•
The water tank is empty or is positioned
incorrectly.
•
The tank is dirty or encrusted with lime
scale.
•
Fill the water tank as described in chap-
ter 5, note 6 and insert it fully.
•
Rinse or descale the tank.
GROUND TOO FINE
ADJUST
grinder
AND
•
The appliance cannot make coffee
•
Turn the steam knob counter-clockwise
(fig. 3) as described in chapter 5 note
10.
open
STEAM
•
The coffee runs off too slowly.
•
Turn the grinding regulator (fig. 15) one
click clockwise (see chapter 7).
EMPTY
used coffee
CONTAINER
•
The grounds container is full or missing.
•
Empty the grounds container and clean
as described in chapter 5, note 7, then
replace.
14 MEANING OF MESSAGES AND WHAT TO DO
INSERT used coffee
•
After cleaning, the grounds container
has not been replaced.
•
Open the service door and insert the
grounds container.
•
Press the
button repeatedly until the number coincides with the number of red squares on the
test strip (for example, if there are 3 red squares on the test strip, press the button until WATER HARD-
NESS 3 is displayed).
•
Press the
button to confirm the value. The coffee maker is now programmed to provide the desca-
ling warning when necessary, based on the actual hardness of the water.
12.7 Resetting factory default settings
If you change the original values, the factory default values can be reset as follows:
•
Press the
button then press the
button repeatedly until the appliance displays:
RESET
TO
DEFAULT
NO
•
Press the
button and the appliance displays “
RESET TO DEFAULT YES
”;
•
Press the
button to reset the factory default values;
•
Press the
button to exit programming mode or
to change other parameters
12.8 Washing
This function can be used by technical service personnel only.
13 CHANGING THE LANGUAGE
To change the language, proceed as follows:
•
Press the
button for at least 5 seconds until the appliance displays:
PRESS
OK
TO
select
ENGLISH
and press the
button for at least 3 seconds to confirm. The appliance then displays the setting mes-
sage in English.