DeLonghi ECAM23450SL Owner Manual - Page 21

Troubleshooting - espresso maker

Page 21 highlights

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY Press CLEAN button • Milk has been delivered recently and the • Press the CLEAN button and keep it tubes inside the milk container must be pressed until the progress bar which cleaned. appears on the display together with the message "Cleaning..." is complete. Insert water spout • The hot water spout is not inserted or is • Insert water spout as far as it will go. inserted incorrectly. INSERT MILK CONTAINER! • The milk container is not inserted correctly. • Insert the milk container as far as it will go. TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot • The cups were not preheated. • Warm the cups by rinsing them with hot water (Note: you can use the hot water function). • The infuser has cooled down because • Before making the coffee, warm the 2/3 minutes have elapsed since the last infuser by pressing the button . coffee was made. • Low coffee temperature is set. • In the menu, set a high coffee temperature. The coffee is thin or not creamy enough. • The coffee is ground too coarsely. • Turn the grinding adjustment knob one click anticlockwise towards "1" while the coffee mill is in operation (fig. 9). Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after delivering 2 coffees (see the section: "Adjusting the coffee mill" on page 13). • The coffee is unsuitable. • Use pre-ground coffee for espresso coffee makers The coffee is delivered • The coffee is ground too finely. too slowly or a drop at a time. • Turn the grinding adjustment knob one click clockwise towards "7" while the coffee mill is in operation (fig. 9). Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after delivering two coffees. (see the section "Adjusting the coffee mill" on page 13). Coffee does not come out of one of the spouts. • The spouts are blocked. • Clean the spouts with a toothpick (fig. 25B). The milk does not come out of the milk spout. • The milk container lid is dirty. • Clean the milk container lid as described in the section "Cleaning the milk container" . 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

22
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
Press CLEAN button
Milk has been delivered recently and the
tubes inside the milk container must be
cleaned.
Press the CLEAN button and keep it
pressed until the progress bar which
appears on the display together with the
message “Cleaning...” is complete.
INSERT WATER SPOUT
The hot water spout is not inserted or is
inserted incorrectly.
Insert water spout as far as it will go.
INSERT MILK
CONTAINER!
The milk container is not inserted
correctly.
Insert the milk container as far as it will
go.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM
POSSIBLE CAUSE
REMEDY
The coffee is not hot
The cups were not preheated.
Warm the cups by rinsing them with hot
water (Note: you can use the hot water
function).
The infuser has cooled down because
2/3 minutes have elapsed since the last
coffee was made.
Before making the coffee, warm the
infuser by pressing the
button .
Low coffee temperature is set.
In the menu, set a high coffee
temperature.
The coffee is thin or
not creamy enough.
The coffee is ground too coarsely.
Turn the grinding adjustment knob one
click anticlockwise towards “1” while
the coffee mill is in operation (fig. 9).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering 2 coffees (see the
section: “Adjusting the coffee mill” on
page 13).
The coffee is unsuitable.
Use pre-ground coffee for espresso
coffee makers
The coffee is delivered
too slowly or a drop at
a time.
The coffee is ground too finely.
Turn the grinding adjustment knob
one click clockwise towards “7” while
the coffee mill is in operation (fig. 9).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering two coffees. (see
the section “Adjusting the coffee mill” on
page 13).
Coffee does not come
out of one of the
spouts.
The spouts are blocked.
Clean the spouts with a toothpick (fig.
25B).
The milk does not
come out of the milk
spout.
The milk container lid is dirty.
Clean the milk container lid as described
in the section “Cleaning the milk
container” .