Definitive Technology SoloCinema Studio SoloCinema Studio Manual - Page 6

Mounting the Sound Bar on the Wall The SoloCinema Studio sound bar has built-in keyhole slots so you can wall-mount it beneath your wall-mounted television. Spacers are included to help secure and install your sound bar on the wall. Note: DO NOT mount the sound bar directly to the wall. You must use the supplied wall-mount spacers to ensure proper operation and reliability. Note: DO MAKE SURE you are using a wall anchors capable of supporting the sound bar. 812.8 mm [32"] Tips For Wall Mounting the Sound Bar Leveling the sound bar: Use a bubble level to make sure the bar is level. Mark holes with pencil, taking the keyhole slot measurement from the bar. Drill Screw Holes in Wall: Pre-drill the pilot-hole locations for mounting screws (not included). Use screws rated to hold securely in the wall material and have screw heads at least 0.33" (8.5 mm) in diameter. NOTE: Measure Twice Make sure the sound bar clears the ceiling, adjacent walls, corners, beams, lighting fixtures and door/window frames. Leave at least 1-2" (25-50 mm) above the sound bar location to allow the sound bar to slide onto the screws. Make sure the center of the bar is centered with the TV screen's center point. Hang Sound bar on Posts: Line up the bar so that the screw heads slide into the keyhole slots. Slide the bar down so the screw heads hold the bar firmly in place. Caption: The sound bar can be mounted on a wall with built-in keyhole slots for a total installed on-wall depth of only 3.8" (9.5 cm). Use the supplied rubber cups that hold the bar off the wall. more information visit our website at www.definitivetech.com 5